Global S&T Development Trend Analysis Platform of Resources and Environment
DOI | 10.1306/11111616038 |
Resurrection of a reservoir sandstone from tomographic data using three-dimensional printing | |
Ishutov, Sergey1; Hasiuk, Franciszek J.1; Fullmer, Shawn M.2; Buono, Antonio S.2; Gray, Joseph N.3; Harding, Chris1 | |
2017-09-01 | |
发表期刊 | AAPG BULLETIN
![]() |
ISSN | 0149-1423 |
EISSN | 1558-9153 |
出版年 | 2017 |
卷号 | 101期号:9 |
文章类型 | Article |
语种 | 英语 |
国家 | USA |
英文摘要 | Three-dimensional (3-D) printing provides an opportunity to build lab-testable models of reservoir rocks from tomographic data. This study combines tomography and 3-D printing to reproduce a sample of the Fontainebleau sandstone at different magnifications to test how this workflow can help characterization of transport properties at multiple scales. For this sandstone, literature analysis has given a porosity of 11%, permeability of 455 md, mean pore throat radius of 15 mm, and a mean grain size of 250 mm. Digital rock analysis of tomographic data from the same sample yielded a porosity of 13%, a permeability of 251 md, and a mean pore throat radius of 15.2 mu m. The 3-D printer available for this study was not able to reproduce the sample's pore system at its original scale. Instead, models were 3-Dprinted at 5-fold, 10-fold, and 15-fold magnifications. Mercury porosimetry performed on these 3-D models revealed differences in porosity (28%-37%) compared to the literature (11%) and to digital calculations (12.7%). Mercury may have intruded the smallest matrix pores of the printing powder and led to a greater than 50% increase in measured porosity. However, the 3-D printed models' pore throat size distribution (15 mu m) and permeability (350-443 md) match both literature data and digital rock analysis. The powder-based 3-D printing method was only able to replicate parts of the pore system (permeability and pore throats) but not the pore bodies. Other 3-D printing methods, such as resin-based stereolithography and photopolymerization, may have the potential to reproduce reservoir rock porosity more accurately. |
领域 | 地球科学 |
收录类别 | SCI-E |
WOS记录号 | WOS:000410656300003 |
WOS关键词 | FONTAINEBLEAU SANDSTONE ; TRANSPORT-PROPERTIES ; PORE ; PERMEABILITY ; POROSITY ; FLOW ; QUANTIFICATION ; RECONSTRUCTION ; SIMULATIONS ; PREDICTION |
WOS类目 | Geosciences, Multidisciplinary |
WOS研究方向 | Geology |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://119.78.100.173/C666/handle/2XK7JSWQ/24607 |
专题 | 地球科学 |
作者单位 | 1.Iowa State Univ, Dept Geol & Atmospher Sci, Sci 1,2237 Osborn Dr, Ames, IA 50011 USA; 2.ExxonMobil Upstream Res Co, 22777 Springwoods Village Pkwy, Spring, TX 77389 USA; 3.Iowa State Univ, Ctr Nondestruct Evaluat, Appl Sci 2,1915 Scholl Rd, Ames, IA 50011 USA |
推荐引用方式 GB/T 7714 | Ishutov, Sergey,Hasiuk, Franciszek J.,Fullmer, Shawn M.,et al. Resurrection of a reservoir sandstone from tomographic data using three-dimensional printing[J]. AAPG BULLETIN,2017,101(9). |
APA | Ishutov, Sergey,Hasiuk, Franciszek J.,Fullmer, Shawn M.,Buono, Antonio S.,Gray, Joseph N.,&Harding, Chris.(2017).Resurrection of a reservoir sandstone from tomographic data using three-dimensional printing.AAPG BULLETIN,101(9). |
MLA | Ishutov, Sergey,et al."Resurrection of a reservoir sandstone from tomographic data using three-dimensional printing".AAPG BULLETIN 101.9(2017). |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论