FABSOAR--A Fabry-Perot Spectrometer for Oxygen A-band Research Final Technical Report

doi:10.2172/988184

GSTDTAP > 地球科学

DOI	10.2172/988184
报告编号	FABSOAR-final-1-091010
来源ID	OSTI ID: 988184
	FABSOAR--A Fabry-Perot Spectrometer for Oxygen A-band Research Final Technical Report
	Watchorn, Steven
	2010-09-10
出版年	2010
语种	英语
国家	美国
领域	地球科学
英文摘要	Because this was a Phase I project, it did not add extensively to the body of A-band knowledge. There was no basic research performed on that subject. The principal addition was that a mechanical and optical design for a triple-etalon Fabry-Perot interferometer (FABSOAR) capable of A-band sensing was sketched out and shown to be within readily feasible instrument fabrication parameters. The parameters for the proposed triple-etalon Fabry-Perot were shown to be very similar to existing Fabry-Perots built by Scientific Solutions. The mechanical design for the FABSOAR instrument incorporated the design of previous Scientific Solutions imagers, condensing the three three-inch-diameter etalons into a single, sturdy tube. The design allowed for the inclusion of a commercial off-the-shelf (COTS) filter wheel and a thermocooled CCD detector from Andor. The tube has supports to mount to a horizontal or vertical opticaltable surface, and was to be coupled to a Scientific Solutions pointing head at the Millstone Hill Observatory in Massachusetts for Phase II calibration and testing.
URL	查看原文
来源平台	US Department of Energy (DOE)
引用统计
文献类型	科技报告
条目标识符	http://119.78.100.173/C666/handle/2XK7JSWQ/4888
专题	地球科学
推荐引用方式 GB/T 7714	Watchorn, Steven. FABSOAR--A Fabry-Perot Spectrometer for Oxygen A-band Research Final Technical Report,2010.